Product Usage

Refill and Usage Instructions

• Remove the white dome shaped pump cap from the bottle by pulling straight out.
• Slowly remove the white collar from the bottle, allowing any previously stored pressure to slowly escape.
• Remove the spray mechanism from the bottle, being careful not to lose the black rubber gasket.
• Be sure the product that you’re adding to the bottle is thoroughly mixed before adding to the PUMPER.
• Fill the PUMPER to the line on the label, or fill approximately 75 percent full. It’s important to have AIR available in the bottle to compress.
• Place the rubber gasket on top of the bottle.
• Insert the sprayer mechanism into the bottle, being sure the rubber gasket is seated correctly and visible completely around the bottle.
• Screw the collar on to the bottle and secure tightly but do not overtighten.
• Gently insert the dome shaped cap back into the sprayer mechanism and pump 10 times.
• Remove the cap and hold bottle 10-12 inches from surface.
• Press down on nozzle to spray.